Merrychef E101: microwave power fails to start

The oven asked for microwave power and did not get it. It often preheats normally and stops the first time a recipe needs microwaves.

Safety first. Sparks, or the crackle of electrical arcing: switch the oven off and do not use it again before a technician has examined it. Never take a cover off. Parts of the microwave circuit can stay charged at a dangerous voltage after the oven is unplugged.

What E101 means on your model

ModelWhat the code meansWhat a technician inspects
eikon e2s and conneX 12/16Microwave power does not start. Preheating can go through as usual. The oven then stops at the first recipe step that needs microwaves, because the controller finds no microwave current where it expects some.The whole microwave supply, in order: the voltage coming in, the microwave fuses, the door interlock switches and the power board, then the high-voltage transformer, capacitor, diode and magnetron, with every connector between them. The code by itself is no proof that the magnetron has to be changed.
eikon e4sThe magnetron failed to energize when requested.On-site diagnosis with the e4s service procedure.

Both the e2s and the conneX manuals tell the technician not to suspect the magnetron first. Fuses, door switches, the power board and the high-voltage components are checked before it.

What staff can safely check

No safe check for staff. Note the full message and call.

Do not remove any cover, and do not try to bypass a door switch or a safety device. If the oven sparks, smells of burning or behaves abnormally, switch it off and leave it off.

What the code does not tell you

The code tells a technician where to start testing. It is not proof that one particular part has failed, and one code can have different causes depending on the model. That is why we test on site before recommending a repair.

See E101 in the full guide

Have these ready when you call

  • Oven modelOn the rating plate at the back of the oven, for example eikon e2s or conneX 12.
  • Serial numberAlso on the rating plate. On the e2s it shows briefly when the oven starts.
  • Error codeThe code and the full message on the screen.
  • A photoOf the screen or the oven, if you can take one.
  • When it happensDuring preheat, mid-cycle, or as soon as it’s switched on.

Where this comes from. Entries were checked in November 2026 against the manufacturer’s own service manuals: eikon e2s (32Z3923), conneX 12 and 16 (32Z9170), eikon e4s (32Z3870), eikon e3 and e4, eikon e1s, conneX 12e, Mealstream EC401 and 402s. Meanings can still vary with the firmware and the manual revision.

Free phone estimate

E101 on your screen? Call us.

305-447-7384

Monday–Friday, 9 AM–8 PM. For urgent weekend issues, leave a voicemail. Weekend messages are prioritized on Monday.

Prefer that we call you? Leave your number.

Enter your name.
Enter a 10-digit phone number.

We call back during business hours.

Call 305-447-7384 Request