Merrychef E116: convection heater does not respond

The oven calls for heat and does not get it. It may fail to preheat, or never reach the selected temperature.

Safety first. Sparks, or the crackle of electrical arcing: switch the oven off and do not use it again before a technician has examined it. Never take a cover off. Parts of the microwave circuit can stay charged at a dangerous voltage after the oven is unplugged.

What E116 means on your model

ModelWhat the code meansWhat a technician inspects
eikon e2s and conneX 12/16Convection heater does not respond. Heat is called for, but the oven may never finish preheating or get to the temperature selected.The heating element, the supply feeding it and its connectors, and the output of the power board that drives it.
eikon e2, e3, e4, e5, and e6Heater does not switch on. From the e2 to the e5 the code means the convection heater has not come on. The e6 uses it for its high heater circuit.The heating element concerned, the wiring that supplies it, and the SRB output that switches it.
eikon e4sThe heater did not switch on when requested.On-site diagnosis with the e4s service procedure.

The e2s detects this from the heater current. The conneX raises the code when the cavity has not reached 100°C within 30 minutes.

What staff can safely check

No safe check for staff. Note the full message and call.

Do not remove any cover, and do not try to bypass a door switch or a safety device. If the oven sparks, smells of burning or behaves abnormally, switch it off and leave it off.

What the code does not tell you

The code tells a technician where to start testing. It is not proof that one particular part has failed, and one code can have different causes depending on the model. That is why we test on site before recommending a repair.

See E116 in the full guide

Have these ready when you call

  • Oven modelOn the rating plate at the back of the oven, for example eikon e2s or conneX 12.
  • Serial numberAlso on the rating plate. On the e2s it shows briefly when the oven starts.
  • Error codeThe code and the full message on the screen.
  • A photoOf the screen or the oven, if you can take one.
  • When it happensDuring preheat, mid-cycle, or as soon as it’s switched on.

Where this comes from. Entries were checked in November 2026 against the manufacturer’s own service manuals: eikon e2s (32Z3923), conneX 12 and 16 (32Z9170), eikon e4s (32Z3870), eikon e3 and e4, eikon e1s, conneX 12e, Mealstream EC401 and 402s. Meanings can still vary with the firmware and the manual revision.

Free phone estimate

E116 on your screen? Call us.

305-447-7384

Monday–Friday, 9 AM–8 PM. For urgent weekend issues, leave a voicemail. Weekend messages are prioritized on Monday.

Prefer that we call you? Leave your number.

Enter your name.
Enter a 10-digit phone number.

We call back during business hours.

Call 305-447-7384 Request